Lawn - Power Equipment - Pumps

The Fillrite 12V DC Pump 13GPM is rugged and lightweight all-in-one sleek design. Features a 12' hose, nozzle, 15' power cable, 1 adjustable suction pipe, 2 NPT bung and clamp assembly that provides a full 360 degree installation convenience, 1/4hp motor and a thermal protection. This design is UL listed and provides positive displacement, rotary vane configuration, ball bearing construction, 30 minute duty cycle, die cast aluminum body and requires no lubrication.

Learn More...

Guaranteed for a long life, the Fillrite 12V Pump with Auto Nozzle features a heavy-duty yet lightweight design that is easy to use. Depending on installation, this pump can deliver up to 13gal of fluid per minute. Features include a flow rate up to 13GPM, a bypass press of 10-12PSI, a dry vacuum 6H, and motor 1/4HP, 12 volts DC, 20 amps. Duty Cycle: 30 minutes. Inlet: bung adapter 2NPT (male), section port 1NPT (female), outlet 3/4NPT (female). Built-in check valve, bypass valve and thermal expansion valve; no additional foot or check valve needed. Ball bearing construction; no lubrication required. Thermal overload protection. Explosion proof, permanent magnet motor. Furnished with UL listed 12' hose and an auto nozzle.

Learn More...

Guaranteed long life, the Fillrite 12V Pump with Manual Nozzle features a heavy-duty yet lightweight design that is easy to use. Depending on installation, this pump can deliver up to 13gal of fluid per minute. Features include a flow rate up to 13GPM, a bypass pressure of 10-12PSI, a dry vacuum 6H, and motor 1/4HP, 12 volts DC, 20 amps. Duty Cycle: 30 minutes. Inlet: bung adapter 2NPT (male), section port 1NPT (female), outlet 3/4NPT (female). Built-in check valve, bypass valve and thermal expansion valve; no additional foot or check valve needed. Ball bearing construction; no lubrication required. Thermal overload protection. Explosion proof, permanent magnet motor. Furnished with UL listed 12' hose and an manual nozzle.

Learn More...

The Flotec 1/3HP 230V Sub Pump is guaranteed to get the job done. Includes a float switch and will pump up to 3,150gal per hour. Use this pump in a 14" diameter sump basin. Two-year warranty included for extra protection.

Learn More...

The Flotec 3/4HP Convert Jet Pump features a heavy duty build that is designed for shallow or deep well applications. Pre-set for 30-50PSI operation and will provide superior performance in depths of water of 100' or less. Includes heavy-duty A.O. Smith motor and pressure regulator that will get the job done.

Learn More...

The Flotech 1-1/4" Brass Foot Valve is a great accessory for any pump. This brass foot valve is for Jet/Submersible Well Pumps.

Learn More...

The Flotech 30/50 PSI Pressure Switch is a great accessory for any pump. This PSI pressure switch with a hose back connection fits jets newer model NCSSI, LCSSI, and LDSSI pumps with the -O1L suffix. Easy to install.

Learn More...

The Flotech FP217-1140 Pressure Switch can be used with most pump applications. Features a 30PSI minimum and a 50PSI maximum. Includes a low pressure cut off.

Learn More...

The Flotech FP3212 1/2HP 230V Submersible Pump will pump from depths of 150' or less. Includes a built in check valve and is rated at 10gal per minute. Comes with a control box for 4" or larger wells. 3 year warranty included.

Learn More...

The Flotech FP4022 3/4HP Shallow Well Pump will pump water at depths of 25' or less. Features a fiberglass reinforced thermoplastic build with a dual voltage motor 115/230. Comes prewired at 230V with a 1-1/4" NPT suction and a 3/4" NPT discharge. This pump holds a capacity of 10gal per minute at 40PSI, with a max pressure of 70PSI.

Learn More...

The Flotech FP4122 3/4HP Shallow Well Pump will pump water at depths of 25' or less. Features a cast iron build with a dual voltage motor 115/230. This unit is prewired at 230V and has a capacity up to 14.4gal per minute at 40 PSI. Has a 1/4" NPT suction, 1" NPT discharge and a max pressure of 70 PSI.

Learn More...

The Flotech FP4332 1HP Convertible Jet Pump features a corrosion resistant build designed for water depths of 100' or less. Use with the Kit FP4875 for shallow well applications and FP4800 for deep well applications. Comes with a 1 year warranty.

Learn More...