Rakes, Blades, Cutters & Subsoilers

Back to Turf Professional Product Guide Index

6’ Landscaping Rake
Steel tines curve to make quick work of smoothing, raking or contouring soil surfaces. Gathering twigs, rocks and other debris is easy work when this tough performer is put to the task. Wheels on this model allow the tines to be adjusted for height above the soil surface. Rake rotates a full 360 degrees to be pulled or pushed. Shown with optional wheel kit.
(100-01604)

5’ Box Blade
This rugged steel rear-mount is perfect for gravel, top soil, mulch or manure. Boxed ends help retain product being worked. Features replaceable blades and adjustable ripper shanks. Double-sided blades allow for grading in both directions.
(100-01601)

6’ Medium Duty Disc
Just big enough for the small farmer and just small enough for the home garden. This medium- duty disc makes planting the garden a pleasure. Features include an angle-iron welded frame, 10 notched and 10 smooth blades for better tillage, 18” disc blades and heavyduty cast bearings with grease fi ttings. This hard worker breaks up 6-1/2’ of soil on a single pass.
(100-01597)

6’ Rear Grader Blade
Ideal for the farmer with light-duty moving needs such as sand, snow or gravel. It features a pull-pin design with forward and reversible blade angle adjustment and a 3-gauge, 1/4” replaceable blade. Category 1 pins are included.
(100-01616)

4’ Rotary Cutter
Built to be durable and productive in a variety of applications. Can handle grass, stalks and brush with ease. Taking their power from the PTO of your tractor, these units work effi ciently from 40 to 80 horsepower on 540 RPM Categories I and II tractors. The laminated, puncture-resistant, adjustable rear wheel can easily change the cutting angle of the deck, provides stability, smooth operation, reduced scraping and easy mowing height adjustments. Additional features include a shielded PTO with shear pins, cast iron gearbox and heattreated, stump jumper with heat-treated forged blades.
(100-01591)

Subsoiler
Designed for deep breakage of hard, low ground where water accumulates. Water will drain easily after one pass with this equipment. Featuring a 1” x 6” solid steel shank with reversible, rectangular, sloped point this subsoiler is rated for tractors less than 50 horsepower.
(100-01622)