Farm Store | articles | Hay Testing and Soil Testing for Forage

Hay Testing and Soil Testing for Forage

Quality hay bales stored in a barnThe principle of testing is the same: know what you've got since looking at a bale of hay or an acre of ground doesn't tell all. Hay with a low proportion of leaves to stem can't provide the balance of energy, protein, minerals and fiber. Soils needing lime that test low in potassium and phosphorus will produce only a fraction of yield under drought or plant stress. When Mother Nature provides the rain and sun for plant growth then a fertile, productive soil responds to produce pastures of plenty. That reduces your hay purchases and gives you the best quality "hay": natural, selective grazing by your horse.

Our Southern States locations can provide a reputable lab source for your samples. We will also accept soil samples to make a fertilizer and lime recommendation.

Testing Hay

Take about 20 samples with a hay-probing tool in as many bales; move the sample around the hay lot to get wider representation. The tool will have to be sharp to break the forage for a good sample. The sample can be sent to any number of labs for RFV (relative feed value) so you can decide how to balance concentrate fed against hay fed. While sampling, it's just as important to determine physical quality: fresh mown smell, green color, absence of mustiness or mold, leaves vs. stems and foreign matter. Absent mold, there is still a tremendous variation in hay quality due mostly to stage of maturity at cutting. You may have to buy twice as much poor quality hay as good quality to get equivalent feed value.

Testing Soil

Using a spade or auger, probe into your soil to a depth of six inches. Get 20 sub-samples per field which are then mixed into one composite for the lab. Larger fields up to 100 acres should have 40 samples. Soil moisture at the time of sampling is best if not too wet or dry since probing is easier and the sub-samples easily crumble into one composite sample that should weigh about a pound.

Soils vary widely within a field. The pH can range from 4.0 to 6.0 in a field needing lime, and plant nutrients can vary as much. To get a representative sample, walk in a random zigzag pattern but avoid fence lines, watering and shade spots, especially in pastures because of manure distribution. Visualize the area as a whole for what is typical for the field and how it will be limed and fertilized. The first and best soil fertility action is lime followed by fertilizer nutrients.

Related Products

More Products Like This:
Grid View
List View
  • Rapitest Soil Test Kit

    SKU 10238800
    The Rapitest Soil Test Kit contains all components needed for 40 tests for pH, Nitrogen, Phosphorus and Potash. The system allows for easy color comparisons versus a typical printed color chart. Instructions are included along with recommendations for over 400 plants. Test results allow you to adjust fertilizer appropriately, ensuring the best possible results.
    to see pricing & availability
  • Whitetail Soil Test Kit

    SKU 02111729
    Ensure food plot success with the Whitetail Soil Test Kit. This laboratory soil test kit from Whitetail Institute is easy to use and provides professional quality (same as the farmers use) testing services to ensure food plot success. The test provides lime and fertilizer requirements to guarantee better food plot performance and to eliminate wasted expenses. The kit includes a soil container, test submission form, and pre-addressed envelope to the Institute's soil testing laboratory.
    to see pricing & availability
  • Behrens Embossed Seed Can 10 gal

    SKU 10223888
    This Behrens Embossed Seed Can will keep rodents and other vermin out with its locking bail handle. This stylish can will hold up to 10 lbs of bird seed so you can conveniently fill all of your feeders.
    to see pricing & availability

Find Your Nearest Southern States Location

Sales & Offers